0 مورد 0 ﷼

شما هیچ آیتمی در سبد خریدتان ندارید.

فریم حرفه ای بدنه Tarot T18 Octocopter Frame Set برای مشاهده‌ی تصویر کامل بر روی عکس فوق دابل کلیک کنید

برای نظر دادن به این محصول اولین باشید

فریم حرفه ای بدنه Tarot T18 Octocopter Frame Set

Tarot T18 Octocopter Frame Set

لطفا تماس بگیرید

شرح مختصر

Tarot T18 Octocopter Frame Set
کد محصول: PR-922
تحویل اکسپرس پرومک محصولات به روش های مختلف بسته به موقعیت مکانی شما در کمترین زمان ارسال می کند
تضمین کمترین قیمت ما تضمین می کنیم محصولات عرضه شده در پرومک بالاترین کیفیت و کمترین قیمت می باشد
تضمین اصالت کالا پرومک تمامی محصولات را به صورت مستقیم از شرکت تولید کننده بدون واسط وارد می کند

جزییات

enlarge the image

Very Big 1250mm Size Octocopter Frame Set by Tarot
Great to carry Prosumer or DSLR camera for long time filming.

Why play big? Because when it comes to flying object, the bigger the aircraft, the more stable it is. This T18 is a Foldable 1250 size octocopter, it's even bigger with propellers installed. The drone itself is made with top end material, 3K Carbon Fiber Plates and Tubes, Aluminum CNC machined parts everywhere, especially the Motor Mount, they are awesome, machined from one big block of aluminum and then anodized with Orange an Black, plus a thick carbon fiber plate as the motor base mount. It has two battery plates on top, you can put 2 X 22.2 5500mah batteries (or more), and you should get more than 15 minutes of flight time. Considering you are carrying heavy payload (e.g. DSLR camera or bigger), this is a long flight time.

Why Eight rotors? Well, eight propellers creates more lift and carry more payload, and best of all, let's consider this is a Fail-Safe feature, with latest flight controller technology, octocopter can still fly and land safely even with two dead motors, for a serious work equipment, it's wise to use Octocopter.

How to carry a DSLR? We recommend the Tarot DSLR gimbal, that is made for this T15 drone, or you can mount other camera gimbal underneath, however, for those who are looking for such aerial solution, you can DIY your camera rig .

Strongly recommend you use high end components on this T18 frame, this is a heavy duty professional equipment, safety first! You may contact us and we will give you some opinions on how to choose the electronics. In our experience the total cost to make this drone fly and carrying DSLR camera is about USD$3500~4500.

Difference between Tarot T15 and Tarot T18?
"15" and "18" means the largest props the frame can take, T15 can take 15" propeller, T18 can take 18" propeller. For 15" propeller with standard 4114 size 330kv motor and 6S battery, thrust is around 1.5kg @ 60% throttle, multiply by 8, that means T15 all up weight should be less than 12kg. For 18" propeller with a bigger motor like 5008 size 340kv, thrust is around 2kg @ 60% throttle, also multiply by 8, that means T18 all up weight should be less than 16kg. You can pick the one to suit your requriement. T15 is using 155mm rail system, which is compatible with DJI Z15 gimbal, T18 is using 165mm rail system, which is Tarot's own standard, only support Tarot's own Brushless Gimbal.



Carry DSLR Cameras like Canon 5D II / 5D III for 15 minutes of mixed flying
That means you will get 15 minutes of Non-Stop and Stable movie quality footage, this is the tool to get it done!





One meter class octocopter
Bigger drone gives you better stability and more payload capability.




It's huge, but still portable!
Fold it up in 3 minutes.




No tools needed for folding it up
They are hand tightening screw, no tools needed.





High end material to keep it light weight and strong
Carbon Fiber and CNC Aluminum everywhere!






Battery mount on top
Able to carry two huge batteries on top, however, please remember to put similar weight of payload underneath to get good balance.




Large ground clearance
You can put a lot of things down there.

Enlarge this photo

enlarge the image



165mm Rail Mount
Different from T15, the T18 has 165mm rail system, this is Tarot's own standard, and will support Tarot's own Brushless Gimbal (coming soon).




Foldable Landing Skids
Easy to fold them up for transportation.




Specifications :
- Arms Dia : 25mm
- Motor to motor dia. : 1200mm
- Tip to tip dia. : 1250mm
- Height : 380cm
- Body size : 250 x 240mm
- Motor mounting holes : 16mm / 19mm / 25mm / 27mm (triangle)

Recommended configuration :
- Motor : Tarot 4114 / 320KV or Tarot 5008 / 340kv
- ESC : Hobbywing Flyfun 40A-OPTO
- Propeller : Best with Tarot 1755~1855 Carbon Propellers
- Flight Controller : DJI A2, WKM or NAZA V2
- Radio Set : Futaba 14SG (use with 8-ch receiver)
- Carrying : Tarot DSLR Gimbal or Gopro Brushless Motor Gimbal or DJI Z15 Brushless Gimbal, Storm or FPV System, Camera
- Remarks : For this T18, you need many wires to solder the motors and servo extension cable to connect with flight controller. You need to have RC knowledge for this drone.


This package includes :
1. T18 Frame (Wires and electronics are sold separately)
2. Landing Skids
3. Some Stickers
4. Assemble Manual




Suitable for :



This is Airframe only!
You need to put many electronics on it yourself, namely Motors, ESC, Flight Controller, FPV, Radio Controller, Camera Gimbal and Propellers, they are NOT easy stuff for beginners, so we recommend this airframe for those who can solder stuff and willing to put things together. This is a professional thing for movie grade video shooting, not a toy!!

 

برچسب‌های محصول

دیگران این محصول را با این برچسب‌ها نشانه گذاری کرده‌اند:

برای جدا کردن برچسب‌ها از فاصله استفاده کنید. برای جملات نقل قول تکی (') را به کار ببرید.

نظر خودتان را بنویسید

شما نظر می دهید: فریم حرفه ای بدنه Tarot T18 Octocopter Frame Set

شما به این محصول چه امتیازی می‌دهید؟ *

  1 ستاره 2 ستاره 3 ستاره 4 ستاره 5 ستاره
قیمت
ارزش خرید
کیفیت

اطلاعات اضافی

برند TAROT
وزن محصول (گرم) 1500
جستجو-ویژگی N/A
اقلام همراه محصول N/A
Loading...
1